4-State Compatibility Engine
Sewing Machine and Table Compatibility Checker
Verify physical cutout fit, hydraulic platform load ratings, and acrylic insert requirements before pairing a machine with a sewing cabinet or table.
1. Sewing Machine
W: 16.3″D: 7″H: 12.2″10.5 lbs
2. Table / Cabinet
Cut: 23.5″ × 12.5″Cap: 45 lbs
Conditional / Insert Req.Brother CS7000i ↔ Arrow Gidget II
Likely Fit (Conditional Requirement)
The machine fits the opening and weight profile. A matching custom acrylic insert or perimeter check is required for flush sewing.
Width margin
+7.20″
Depth margin
+5.50″
Weight headroom
+34.5 lbs
Top-view fit diagram
Engineering Verification Checks
Opening Cutout Dimensions
Clearance buffer is generous: 7.20″ width and 5.50″ depth surrounding the machine body.
Platform Weight Rating
Safe load: 10.5 lbs is well within the 45 lbs rated capacity.
Flatbed Flush Alignment
Platform drops up to 3.5″ to position your machine's sewing bed flush with the table surface.
Custom Acrylic Insert
For flush flatbed sewing, an acrylic insert custom-cut to the Brother CS7000i contour is recommended.